For consistent controlled cooking, Clifton Water baths allows chefs to cook in a
precise temperature controlled environment, to produce consistently perfect results.
Ideal for sous vide and other low temperature cooking, these baths are an
indispensable piece of equipment for all leading chefs worldwide.
The duobath range allows chefs to use each chamber simultaneously at two different
temperatures.
Versatility - As with all Clifton duobaths, each side can be operated at two different temperatures
simultaneously and with two different liquids e.g. water in one side and oil in the
other.
Precise temperatures - Using the same high precision controllers found on all other Nickel Electro
products, accuracy and repeatability are guaranteed. Actual temperature is clearly
displayed to 0.1°C.
If required, the integrated timer on each controller can be set between 1 minute and 99
hours. There is audio/visual notification at the end of the set period after which the
bath still continues to operate at the set temperature.
Current time and temperature settings are retained in memory even after ‘power off.’
High quality build and features - Temperatures can be easily and rapidly set with the push button, wipe clean control
panel. The entire case is constructed from high quality stainless steel.
If the water drops below the recommended minimum level or the unit is inadvertently
switched on without being filled with water, ‘FILL’ appears on the display as a visual
alert and gives run dry protection.
Side lifting handles make it easy to carry the bath around the kitchen and the product
is supplied with two lids which have easy grab insulated handles. The bath is also
supplied with two removable stainless steel perforated shelves which provide
effective distribution of heat uniformly throughout the chamber by convection.
Drain tap on each chamber.
In common with all Clifton Baths, the product is powered from a standard 13 amp
wall socket.
|
|
High Resolution
Supplied complete with drain taps, lids and removable shelves
Product shown with accessory P270 divider.
Temperature:
Display/resolution: Digital LED/ 0.1°C
Temp. range: Ambient + 5°C ~ 95°C
Temp. setting: Pushbutton
Stability/uniformity: ± 0.2°C / ±0.1°
Timer:
Display/resolution: Digital LED / 1 minute increments
Duration: 1 minute – 99 hours
Cycle end: Audio/visual alert
General:
Dimensions (mm) : overall ~ 600w x 332d x 290h: working ~ 240w x 300d x 150h (each chamber)
Electrical supply: 230v
Power consumption: 1.6kW
Safety: Visual ‘FILL’ message on low water level
Run-dry protection

Datasheet
|